ISO-10303-21;
HEADER;
FILE_DESCRIPTION (( 'STEP AP203' ),
    '1' );
FILE_NAME ('ZP03-3SXX 模型.STEP',
    '2025-09-05T00:45:20',
    ( '' ),
    ( '' ),
    'SwSTEP 2.0',
    'SolidWorks 2022',
    '' );
FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' ));
ENDSEC;

DATA;
#1 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#2 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#3 = LINE ( 'NONE', #166, #187 ) ;
#4 = VERTEX_POINT ( 'NONE', #542 ) ;
#5 = CIRCLE ( 'NONE', #346, 0.7500000000000024425 ) ;
#6 = VERTEX_POINT ( 'NONE', #861 ) ;
#7 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ;
#8 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 8.673617379884026597E-16 ) ) ;
#9 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #809, #19 ) ;
#10 = AXIS2_PLACEMENT_3D ( 'NONE', #822, #339, #562 ) ;
#11 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 14.51176674437705749 ) ) ;
#12 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #209, #656 ) ;
#13 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#14 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 8, 0, .AHEAD. ) ;
#15 = EDGE_LOOP ( 'NONE', ( #354, #135, #649, #366 ) ) ;
#16 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.000000000000000000, 16.60176674437705557 ) ) ;
#17 = ADVANCED_FACE ( 'NONE', ( #169 ), #463, .F. ) ;
#18 = EDGE_CURVE ( 'NONE', #384, #302, #368, .T. ) ;
#19 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#20 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 8, 0, .AHEAD. ) ;
#21 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #832, #973 ) ;
#22 = AXIS2_PLACEMENT_3D ( 'NONE', #866, #8, #81 ) ;
#23 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#24 = LINE ( 'NONE', #801, #233 ) ;
#25 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#26 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#27 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ;
#28 = PLANE ( 'NONE',  #430 ) ;
#29 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.5000000000000004441, 17.10176674437705913 ) ) ;
#30 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.000000000000000000, 0.000000000000000000 ) ) ;
#31 = EDGE_CURVE ( 'NONE', #748, #212, #95, .T. ) ;
#32 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#33 = EDGE_CURVE ( 'NONE', #930, #302, #481, .T. ) ;
#34 = AXIS2_PLACEMENT_3D ( 'NONE', #774, #79, #134 ) ;
#35 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.808233255622944569 ) ) ;
#36 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.00000000000000000, 16.60176674437705557 ) ) ;
#37 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#38 = VECTOR ( 'NONE', #447, 1000.000000000000000 ) ;
#39 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#40 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;
#41 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, 0.000000000000000000 ) ) ;
#42 = VERTEX_POINT ( 'NONE', #179 ) ;
#43 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#44 = PLANE ( 'NONE',  #349 ) ;
#45 = ADVANCED_FACE ( 'NONE', ( #711 ), #872, .T. ) ;
#46 = EDGE_CURVE ( 'NONE', #584, #748, #629, .T. ) ;
#47 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.808233255622944569 ) ) ;
#48 = ORIENTED_EDGE ( 'NONE', *, *, #758, .F. ) ;
#49 = LINE ( 'NONE', #483, #971 ) ;
#50 = EDGE_LOOP ( 'NONE', ( #453, #155, #386, #699 ) ) ;
#51 = EDGE_LOOP ( 'NONE', ( #7, #696, #619 ) ) ;
#52 = LINE ( 'NONE', #527, #523 ) ;
#53 = AXIS2_PLACEMENT_3D ( 'NONE', #674, #821, #117 ) ;
#54 = VECTOR ( 'NONE', #41, 1000.000000000000000 ) ;
#55 = ORIENTED_EDGE ( 'NONE', *, *, #230, .F. ) ;
#56 = LOCAL_TIME ( 8, 45, 20.00000000000000000, #20 ) ;
#57 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#58 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .F. ) ;
#59 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ;
#60 = LINE ( 'NONE', #208, #1006 ) ;
#61 = AXIS2_PLACEMENT_3D ( 'NONE', #935, #793, #814 ) ;
#62 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #255, #23 ) ;
#63 = ORIENTED_EDGE ( 'NONE', *, *, #979, .F. ) ;
#64 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#65 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #355, #749 ) ;
#66 = EDGE_LOOP ( 'NONE', ( #910, #780, #669 ) ) ;
#67 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.50000000000000000, -7.798233255622939453 ) ) ;
#68 = FACE_OUTER_BOUND ( 'NONE', #210, .T. ) ;
#69 = ADVANCED_FACE ( 'NONE', ( #870 ), #172, .T. ) ;
#70 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
#71 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'ZP03-3SXX 模型', ( #794, #756 ), #347 ) ;
#72 = LINE ( 'NONE', #842, #797 ) ;
#73 = VECTOR ( 'NONE', #256, 1000.000000000000000 ) ;
#74 = EDGE_LOOP ( 'NONE', ( #214, #606, #959, #59 ) ) ;
#75 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, -2.731847993664263218E-16 ) ) ;
#76 = EDGE_LOOP ( 'NONE', ( #948, #704, #590, #511 ) ) ;
#77 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 4.351766744377058238 ) ) ;
#78 = VERTEX_POINT ( 'NONE', #324 ) ;
#79 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#80 = VERTEX_POINT ( 'NONE', #330 ) ;
#81 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -8.673617379884027583E-16, -1.000000000000000000 ) ) ;
#82 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #655 ) ) ;
#83 = EDGE_CURVE ( 'NONE', #678, #507, #537, .T. ) ;
#84 = VERTEX_POINT ( 'NONE', #176 ) ;
#85 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#86 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ;
#87 = FACE_OUTER_BOUND ( 'NONE', #940, .T. ) ;
#88 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#89 = VECTOR ( 'NONE', #504, 1000.000000000000000 ) ;
#90 = ORIENTED_EDGE ( 'NONE', *, *, #551, .T. ) ;
#91 = EDGE_CURVE ( 'NONE', #507, #927, #963, .T. ) ;
#92 = CALENDAR_DATE ( 2025, 5, 9 ) ;
#93 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, -8.298233255622939453 ) ) ;
#94 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000004441, 16.60176674437705557 ) ) ;
#95 = LINE ( 'NONE', #101, #895 ) ;
#96 = LOCAL_TIME ( 8, 45, 20.00000000000000000, #14 ) ;
#97 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #717, #305, ( #977 ) ) ;
#98 = EDGE_CURVE ( 'NONE', #748, #78, #106, .T. ) ;
#99 = AXIS2_PLACEMENT_3D ( 'NONE', #828, #663, #485 ) ;
#100 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#101 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 0.5000000000000004441, 17.10176674437705913 ) ) ;
#102 = APPROVAL_DATE_TIME ( #541, #529 ) ;
#103 = EDGE_CURVE ( 'NONE', #678, #526, #406, .T. ) ;
#104 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -8.298233255622939453 ) ) ;
#105 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#106 = CIRCLE ( 'NONE', #480, 0.5000000000000004441 ) ;
#107 = CIRCLE ( 'NONE', #858, 0.7500000000000019984 ) ;
#108 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#109 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.50000000000000000, -7.798233255622939453 ) ) ;
#110 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ;
#111 = FACE_OUTER_BOUND ( 'NONE', #365, .T. ) ;
#112 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#113 = ADVANCED_FACE ( 'NONE', ( #253 ), #249, .T. ) ;
#114 = CIRCLE ( 'NONE', #680, 0.5000000000000004441 ) ;
#115 = LINE ( 'NONE', #30, #360 ) ;
#116 = EDGE_CURVE ( 'NONE', #409, #4, #24, .T. ) ;
#117 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#118 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.00000000000000000, 16.60176674437705557 ) ) ;
#119 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#120 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#121 = DIRECTION ( 'NONE',  ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#122 = DIRECTION ( 'NONE',  ( -2.731847993664263218E-16, 0.000000000000000000, -1.000000000000000000 ) ) ;
#123 = LINE ( 'NONE', #829, #1022 ) ;
#124 = EDGE_CURVE ( 'NONE', #645, #990, #618, .T. ) ;
#125 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
#126 = LINE ( 'NONE', #426, #411 ) ;
#127 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 0.5000000000000004441, 16.60176674437705557 ) ) ;
#128 = SPHERICAL_SURFACE ( 'NONE', #194, 0.5000000000000000000 ) ;
#129 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#130 = ORIENTED_EDGE ( 'NONE', *, *, #33, .T. ) ;
#131 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 14.51176674437705749 ) ) ;
#132 = DIRECTION ( 'NONE',  ( 2.731847993664263218E-16, 0.000000000000000000, 1.000000000000000000 ) ) ;
#133 = ORIENTED_EDGE ( 'NONE', *, *, #173, .F. ) ;
#134 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#135 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ;
#136 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ;
#137 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#138 = AXIS2_PLACEMENT_3D ( 'NONE', #277, #120, #37 ) ;
#139 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#140 = EDGE_LOOP ( 'NONE', ( #231, #472, #984, #928 ) ) ;
#141 = EDGE_LOOP ( 'NONE', ( #1007, #48, #689, #839 ) ) ;
#142 = AXIS2_PLACEMENT_3D ( 'NONE', #949, #862, #153 ) ;
#143 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -6.558233255622946345 ) ) ;
#144 = CIRCLE ( 'NONE', #268, 0.5000000000000004441 ) ;
#145 = EDGE_CURVE ( 'NONE', #302, #678, #333, .T. ) ;
#146 = ORIENTED_EDGE ( 'NONE', *, *, #820, .T. ) ;
#147 = EDGE_CURVE ( 'NONE', #764, #678, #154, .T. ) ;
#148 = LINE ( 'NONE', #938, #974 ) ;
#149 = VECTOR ( 'NONE', #198, 1000.000000000000000 ) ;
#150 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .T. ) ;
#151 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 0.000000000000000000, 16.60176674437705557 ) ) ;
#152 = EDGE_LOOP ( 'NONE', ( #600, #216, #513, #456 ) ) ;
#153 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#154 = CIRCLE ( 'NONE', #992, 0.5000000000000004441 ) ;
#155 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ;
#156 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -8.298233255622939453 ) ) ;
#157 = AXIS2_PLACEMENT_3D ( 'NONE', #322, #701, #108 ) ;
#158 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
#159 = SPHERICAL_SURFACE ( 'NONE', #452, 0.5000000000000000000 ) ;
#160 = ADVANCED_FACE ( 'NONE', ( #969 ), #564, .T. ) ;
#161 = EDGE_LOOP ( 'NONE', ( #476, #454, #437, #136 ) ) ;
#162 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 8, 0, .AHEAD. ) ;
#163 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ;
#164 = CIRCLE ( 'NONE', #954, 0.5000000000000004441 ) ;
#165 = EDGE_CURVE ( 'NONE', #630, #676, #115, .T. ) ;
#166 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 15.00000000000000000, 17.10176674437705913 ) ) ;
#167 = ORIENTED_EDGE ( 'NONE', *, *, #83, .F. ) ;
#168 = APPROVAL_ROLE ( '' ) ;
#169 = FACE_OUTER_BOUND ( 'NONE', #865, .T. ) ;
#170 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#171 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#172 = CYLINDRICAL_SURFACE ( 'NONE', #942, 0.5000000000000004441 ) ;
#173 = EDGE_CURVE ( 'NONE', #309, #769, #718, .T. ) ;
#174 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#175 = AXIS2_PLACEMENT_3D ( 'NONE', #766, #373, #224 ) ;
#176 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#177 = EDGE_LOOP ( 'NONE', ( #760, #306, #63, #372 ) ) ;
#178 = FACE_OUTER_BOUND ( 'NONE', #141, .T. ) ;
#179 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.50000000000000000, 16.60176674437705557 ) ) ;
#180 = CALENDAR_DATE ( 2025, 5, 9 ) ;
#181 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
#182 = FACE_OUTER_BOUND ( 'NONE', #785, .T. ) ;
#183 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#184 = CIRCLE ( 'NONE', #308, 0.7500000000000024425 ) ;
#185 = EDGE_LOOP ( 'NONE', ( #686, #1019, #912, #1015 ) ) ;
#186 = LINE ( 'NONE', #499, #89 ) ;
#187 = VECTOR ( 'NONE', #807, 1000.000000000000000 ) ;
#188 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#189 = AXIS2_PLACEMENT_3D ( 'NONE', #685, #1011, #922 ) ;
#190 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;
#191 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#192 = CIRCLE ( 'NONE', #710, 0.5000000000000004441 ) ;
#193 = CYLINDRICAL_SURFACE ( 'NONE', #369, 0.7500000000000024425 ) ;
#194 = AXIS2_PLACEMENT_3D ( 'NONE', #492, #276, #498 ) ;
#195 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#196 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#197 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#198 = DIRECTION ( 'NONE',  ( 2.731847993664263218E-16, 0.000000000000000000, 1.000000000000000000 ) ) ;
#199 = EDGE_CURVE ( 'NONE', #675, #409, #202, .T. ) ;
#200 = EDGE_CURVE ( 'NONE', #1012, #891, #405, .T. ) ;
#201 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#202 = CIRCLE ( 'NONE', #638, 0.7500000000000024425 ) ;
#203 = EDGE_LOOP ( 'NONE', ( #86, #693, #292, #316 ) ) ;
#204 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#205 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#206 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#207 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ;
#208 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.000000000000000000, -8.298233255622939453 ) ) ;
#209 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#210 = EDGE_LOOP ( 'NONE', ( #158, #58, #55, #448 ) ) ;
#211 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 3.601766744377056018 ) ) ;
#212 = VERTEX_POINT ( 'NONE', #509 ) ;
#213 = LINE ( 'NONE', #597, #38 ) ;
#214 = ORIENTED_EDGE ( 'NONE', *, *, #759, .F. ) ;
#215 = CYLINDRICAL_SURFACE ( 'NONE', #622, 0.5000000000000004441 ) ;
#216 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
#217 = ORIENTED_EDGE ( 'NONE', *, *, #868, .F. ) ;
#218 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 8.673617379884026597E-16 ) ) ;
#219 = CIRCLE ( 'NONE', #599, 0.5000000000000004441 ) ;
#220 = ADVANCED_FACE ( 'NONE', ( #661 ), #734, .T. ) ;
#221 = EDGE_CURVE ( 'NONE', #80, #1001, #853, .T. ) ;
#222 = EDGE_LOOP ( 'NONE', ( #217, #1003 ) ) ;
#223 = AXIS2_PLACEMENT_3D ( 'NONE', #931, #218, #925 ) ;
#224 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#225 = ADVANCED_FACE ( 'NONE', ( #352 ), #128, .T. ) ;
#226 = CIRCLE ( 'NONE', #62, 0.5000000000000004441 ) ;
#227 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ;
#228 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#229 = ORIENTED_EDGE ( 'NONE', *, *, #691, .T. ) ;
#230 = EDGE_CURVE ( 'NONE', #927, #813, #898, .T. ) ;
#231 = ORIENTED_EDGE ( 'NONE', *, *, #997, .T. ) ;
#232 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#233 = VECTOR ( 'NONE', #105, 1000.000000000000000 ) ;
#234 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#235 = CIRCLE ( 'NONE', #540, 0.7500000000000024425 ) ;
#236 = EDGE_LOOP ( 'NONE', ( #382, #207, #290 ) ) ;
#237 = CYLINDRICAL_SURFACE ( 'NONE', #142, 0.5000000000000004441 ) ;
#238 = EDGE_LOOP ( 'NONE', ( #283, #130, #834, #921 ) ) ;
#239 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ;
#240 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -7.798233255622939453 ) ) ;
#241 = AXIS2_PLACEMENT_3D ( 'NONE', #670, #687, #827 ) ;
#242 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#243 = CYLINDRICAL_SURFACE ( 'NONE', #572, 0.7500000000000024425 ) ;
#244 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 14.43962453810299174 ) ) ;
#245 = VERTEX_POINT ( 'NONE', #588 ) ;
#246 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#247 = EDGE_CURVE ( 'NONE', #42, #1001, #164, .T. ) ;
#248 = EDGE_CURVE ( 'NONE', #956, #645, #988, .T. ) ;
#249 = CYLINDRICAL_SURFACE ( 'NONE', #582, 0.5000000000000004441 ) ;
#250 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#251 = ORIENTED_EDGE ( 'NONE', *, *, #951, .F. ) ;
#252 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#253 = FACE_OUTER_BOUND ( 'NONE', #15, .T. ) ;
#254 = APPROVAL_ROLE ( '' ) ;
#255 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, 0.000000000000000000 ) ) ;
#256 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#257 = EDGE_CURVE ( 'NONE', #384, #42, #577, .T. ) ;
#258 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#259 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, 0.000000000000000000, -5.058233255622941904 ) ) ;
#260 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ;
#261 = CYLINDRICAL_SURFACE ( 'NONE', #138, 0.5000000000000004441 ) ;
#262 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#263 = ORGANIZATION ( '未指定', '未指定', '' ) ;
#264 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 0.5000000000000004441, 17.10176674437705913 ) ) ;
#265 = AXIS2_PLACEMENT_3D ( 'NONE', #919, #299, #679 ) ;
#266 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#267 = EDGE_CURVE ( 'NONE', #596, #78, #428, .T. ) ;
#268 = AXIS2_PLACEMENT_3D ( 'NONE', #985, #121, #893 ) ;
#269 = LINE ( 'NONE', #900, #488 ) ;
#270 = APPROVAL ( #331, '未指定' ) ;
#271 = ADVANCED_FACE ( 'NONE', ( #823 ), #908, .T. ) ;
#272 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.00000000000000000, 16.60176674437705557 ) ) ;
#273 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;
#274 = EDGE_LOOP ( 'NONE', ( #462, #323 ) ) ;
#275 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 15.18962453810299529 ) ) ;
#276 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#277 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#278 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #955, #13 ) ;
#279 = ORIENTED_EDGE ( 'NONE', *, *, #31, .F. ) ;
#280 = FACE_OUTER_BOUND ( 'NONE', #747, .T. ) ;
#281 = AXIS2_PLACEMENT_3D ( 'NONE', #466, #336, #174 ) ;
#282 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#283 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
#284 = LINE ( 'NONE', #512, #654 ) ;
#285 = ORIENTED_EDGE ( 'NONE', *, *, #652, .T. ) ;
#286 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
#287 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 0.5000000000000004441, -8.298233255622939453 ) ) ;
#288 = AXIS2_PLACEMENT_3D ( 'NONE', #666, #40, #205 ) ;
#289 = EDGE_CURVE ( 'NONE', #526, #630, #725, .T. ) ;
#290 = ORIENTED_EDGE ( 'NONE', *, *, #673, .F. ) ;
#291 = EDGE_CURVE ( 'NONE', #245, #630, #502, .T. ) ;
#292 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
#293 = SPHERICAL_SURFACE ( 'NONE', #470, 0.5000000000000000000 ) ;
#294 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ;
#295 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#296 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
#297 = EDGE_LOOP ( 'NONE', ( #754, #422, #300 ) ) ;
#298 = CIRCLE ( 'NONE', #1014, 0.7500000000000024425 ) ;
#299 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#300 = ORIENTED_EDGE ( 'NONE', *, *, #363, .F. ) ;
#301 = FACE_OUTER_BOUND ( 'NONE', #140, .T. ) ;
#302 = VERTEX_POINT ( 'NONE', #423 ) ;
#303 = PLANE ( 'NONE',  #435 ) ;
#304 = EDGE_LOOP ( 'NONE', ( #1008, #579, #830, #916 ) ) ;
#305 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
#306 = ORIENTED_EDGE ( 'NONE', *, *, #691, .F. ) ;
#307 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#308 = AXIS2_PLACEMENT_3D ( 'NONE', #489, #989, #414 ) ;
#309 = VERTEX_POINT ( 'NONE', #913 ) ;
#310 = APPROVAL_DATE_TIME ( #554, #270 ) ;
#311 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #612, #781 ) ;
#312 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #915, #761 ) ;
#313 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ;
#314 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#315 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, -7.798233255622939453 ) ) ;
#316 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ;
#317 = CIRCLE ( 'NONE', #10, 0.5000000000000004441 ) ;
#318 = VECTOR ( 'NONE', #914, 1000.000000000000000 ) ;
#319 = CYLINDRICAL_SURFACE ( 'NONE', #621, 0.7500000000000024425 ) ;
#320 = ADVANCED_FACE ( 'NONE', ( #362 ), #515, .T. ) ;
#321 = EDGE_CURVE ( 'NONE', #446, #990, #126, .T. ) ;
#322 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -7.798233255622939453 ) ) ;
#323 = ORIENTED_EDGE ( 'NONE', *, *, #173, .T. ) ;
#324 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 0.5000000000000004441, 16.60176674437705557 ) ) ;
#325 = CC_DESIGN_SECURITY_CLASSIFICATION ( #534, ( #977 ) ) ;
#326 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#327 = SPHERICAL_SURFACE ( 'NONE', #909, 0.5000000000000000000 ) ;
#328 = EDGE_LOOP ( 'NONE', ( #923, #1020, #535, #835 ) ) ;
#329 = VECTOR ( 'NONE', #408, 1000.000000000000000 ) ;
#330 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.00000000000000000, 17.10176674437705913 ) ) ;
#331 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#332 = FACE_BOUND ( 'NONE', #546, .T. ) ;
#333 = LINE ( 'NONE', #646, #73 ) ;
#334 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #457, #943, ( #977 ) ) ;
#335 = EDGE_CURVE ( 'NONE', #584, #245, #60, .T. ) ;
#336 = DIRECTION ( 'NONE',  ( -0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;
#337 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;
#338 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#339 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#340 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#341 = CIRCLE ( 'NONE', #53, 0.5000000000000004441 ) ;
#342 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 13.68962453810298996 ) ) ;
#343 = EDGE_CURVE ( 'NONE', #84, #384, #490, .T. ) ;
#344 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#345 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#346 = AXIS2_PLACEMENT_3D ( 'NONE', #607, #307, #690 ) ;
#347 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #397 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #374, #296, #929 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
#348 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#349 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #344, #978 ) ;
#350 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.00000000000000000, 16.60176674437705557 ) ) ;
#351 = ADVANCED_FACE ( 'NONE', ( #831 ), #936, .T. ) ;
#352 = FACE_OUTER_BOUND ( 'NONE', #236, .T. ) ;
#353 = FACE_OUTER_BOUND ( 'NONE', #203, .T. ) ;
#354 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ;
#355 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#356 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#357 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#358 = EDGE_LOOP ( 'NONE', ( #591, #125, #613, #593 ) ) ;
#359 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#360 = VECTOR ( 'NONE', #340, 1000.000000000000000 ) ;
#361 = EDGE_LOOP ( 'NONE', ( #442, #852, #167 ) ) ;
#362 = FACE_OUTER_BOUND ( 'NONE', #238, .T. ) ;
#363 = EDGE_CURVE ( 'NONE', #859, #813, #114, .T. ) ;
#364 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 0.000000000000000000, -7.798233255622939453 ) ) ;
#365 = EDGE_LOOP ( 'NONE', ( #133, #450, #538, #882 ) ) ;
#366 = ORIENTED_EDGE ( 'NONE', *, *, #820, .F. ) ;
#367 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#368 = CIRCLE ( 'NONE', #61, 0.5000000000000004441 ) ;
#369 = AXIS2_PLACEMENT_3D ( 'NONE', #906, #491, #204 ) ;
#370 = AXIS2_PLACEMENT_3D ( 'NONE', #508, #43, #1009 ) ;
#371 = FACE_OUTER_BOUND ( 'NONE', #74, .T. ) ;
#372 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ;
#373 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#374 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
#375 = ORIENTED_EDGE ( 'NONE', *, *, #951, .T. ) ;
#376 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#377 = EDGE_CURVE ( 'NONE', #676, #6, #631, .T. ) ;
#378 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -7.798233255622939453 ) ) ;
#379 = ORIENTED_EDGE ( 'NONE', *, *, #363, .T. ) ;
#380 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#381 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ;
#382 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ;
#383 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 4.351766744377058238 ) ) ;
#384 = VERTEX_POINT ( 'NONE', #67 ) ;
#385 = APPROVAL_STATUS ( 'not_yet_approved' ) ;
#386 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
#387 = CYLINDRICAL_SURFACE ( 'NONE', #946, 0.5000000000000004441 ) ;
#388 = CIRCLE ( 'NONE', #563, 0.5000000000000004441 ) ;
#389 = FACE_BOUND ( 'NONE', #510, .T. ) ;
#390 = EDGE_CURVE ( 'NONE', #309, #840, #52, .T. ) ;
#391 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.000000000000000000, 16.60176674437705557 ) ) ;
#392 = VECTOR ( 'NONE', #771, 1000.000000000000000 ) ;
#393 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#394 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -7.798233255622939453 ) ) ;
#395 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#396 = VECTOR ( 'NONE', #393, 1000.000000000000000 ) ;
#397 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000082E-05 ), #374, 'distance_accuracy_value', 'NONE');
#398 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 5.101766744377060903 ) ) ;
#399 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ;
#400 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511277, 15.00000000000000000, 6.790727104404286494E-15 ) ) ;
#401 = LOCAL_TIME ( 8, 45, 20.00000000000000000, #961 ) ;
#402 = DATE_AND_TIME ( #92, #520 ) ;
#403 = FACE_OUTER_BOUND ( 'NONE', #431, .T. ) ;
#404 = ADVANCED_FACE ( 'NONE', ( #757 ), #991, .T. ) ;
#405 = CIRCLE ( 'NONE', #21, 0.7500000000000024425 ) ;
#406 = LINE ( 'NONE', #636, #672 ) ;
#407 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#408 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#409 = VERTEX_POINT ( 'NONE', #143 ) ;
#410 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#411 = VECTOR ( 'NONE', #1013, 1000.000000000000000 ) ;
#412 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#413 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#414 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#415 = PLANE ( 'NONE',  #528 ) ;
#416 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, 16.60176674437705557 ) ) ;
#417 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#418 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, -7.798233255622939453 ) ) ;
#419 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, 16.60176674437705557 ) ) ;
#420 = AXIS2_PLACEMENT_3D ( 'NONE', #77, #533, #380 ) ;
#421 = PLANE ( 'NONE',  #750 ) ;
#422 = ORIENTED_EDGE ( 'NONE', *, *, #230, .T. ) ;
#423 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.00000000000000000, -8.298233255622939453 ) ) ;
#424 = FACE_OUTER_BOUND ( 'NONE', #826, .T. ) ;
#425 = EDGE_LOOP ( 'NONE', ( #755, #500 ) ) ;
#426 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 3.601766744377056462 ) ) ;
#427 = ADVANCED_FACE ( 'NONE', ( #280 ), #293, .T. ) ;
#428 = LINE ( 'NONE', #264, #149 ) ;
#429 = FACE_OUTER_BOUND ( 'NONE', #361, .T. ) ;
#430 = AXIS2_PLACEMENT_3D ( 'NONE', #884, #338, #201 ) ;
#431 = EDGE_LOOP ( 'NONE', ( #920, #667, #313 ) ) ;
#432 = EDGE_LOOP ( 'NONE', ( #741, #772, #1017 ) ) ;
#433 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#434 = AXIS2_PLACEMENT_3D ( 'NONE', #315, #171, #647 ) ;
#435 = AXIS2_PLACEMENT_3D ( 'NONE', #941, #1018, #695 ) ;
#436 = DIRECTION ( 'NONE',  ( -2.731847993664263218E-16, 0.000000000000000000, -1.000000000000000000 ) ) ;
#437 = ORIENTED_EDGE ( 'NONE', *, *, #964, .T. ) ;
#438 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ;
#439 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#440 = CLOSED_SHELL ( 'NONE', ( #351, #894, #995, #603, #553, #952, #320, #980, #855, #635, #1025, #986, #220, #616, #113, #45, #707, #568, #1010, #641, #576, #736, #427, #917, #69, #583, #724, #225, #160, #271, #879, #837, #782, #796, #665, #770, #404, #17 ) ) ;
#441 = CIRCLE ( 'NONE', #800, 0.5000000000000004441 ) ;
#442 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ;
#443 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#444 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #402, #624, ( #714 ) ) ;
#445 = EDGE_CURVE ( 'NONE', #526, #930, #601, .T. ) ;
#446 = VERTEX_POINT ( 'NONE', #587 ) ;
#447 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#448 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ;
#449 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #819, #195 ) ;
#450 = ORIENTED_EDGE ( 'NONE', *, *, #390, .T. ) ;
#451 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#452 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #242, #539 ) ;
#453 = ORIENTED_EDGE ( 'NONE', *, *, #494, .T. ) ;
#454 = ORIENTED_EDGE ( 'NONE', *, *, #199, .F. ) ;
#455 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#456 = ORIENTED_EDGE ( 'NONE', *, *, #964, .F. ) ;
#457 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#458 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 14.51176674437705749 ) ) ;
#459 = FACE_OUTER_BOUND ( 'NONE', #328, .T. ) ;
#460 = FACE_OUTER_BOUND ( 'NONE', #177, .T. ) ;
#461 = EDGE_CURVE ( 'NONE', #80, #748, #213, .T. ) ;
#462 = ORIENTED_EDGE ( 'NONE', *, *, #758, .T. ) ;
#463 = PLANE ( 'NONE',  #487 ) ;
#464 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.00000000000000000, -7.798233255622939453 ) ) ;
#465 = AXIS2_PLACEMENT_3D ( 'NONE', #999, #191, #410 ) ;
#466 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, 16.60176674437705557 ) ) ;
#467 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.5000000000000004441, 16.60176674437705557 ) ) ;
#468 = EDGE_CURVE ( 'NONE', #596, #930, #976, .T. ) ;
#469 = DATE_AND_TIME ( #180, #803 ) ;
#470 = AXIS2_PLACEMENT_3D ( 'NONE', #228, #684, #295 ) ;
#471 = LINE ( 'NONE', #475, #810 ) ;
#472 = ORIENTED_EDGE ( 'NONE', *, *, #267, .T. ) ;
#473 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#474 = APPROVAL ( #385, '未指定' ) ;
#475 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 13.76176674437705394 ) ) ;
#476 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
#477 = DIRECTION ( 'NONE',  ( 2.731847993664263218E-16, 0.000000000000000000, 1.000000000000000000 ) ) ;
#478 = EDGE_CURVE ( 'NONE', #1012, #775, #72, .T. ) ;
#479 = CYLINDRICAL_SURFACE ( 'NONE', #897, 0.5000000000000004441 ) ;
#480 = AXIS2_PLACEMENT_3D ( 'NONE', #467, #486, #960 ) ;
#481 = LINE ( 'NONE', #716, #950 ) ;
#482 = CIRCLE ( 'NONE', #157, 0.5000000000000004441 ) ;
#483 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 0.000000000000000000, 16.60176674437705557 ) ) ;
#484 = APPROVAL_PERSON_ORGANIZATION ( #864, #529, #558 ) ;
#485 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#486 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#487 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #1, #626 ) ;
#488 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ;
#489 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, 0.000000000000000000, 14.51176674437705749 ) ) ;
#490 = CIRCLE ( 'NONE', #816, 0.5000000000000004441 ) ;
#491 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#492 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#493 = EDGE_CURVE ( 'NONE', #937, #840, #604, .T. ) ;
#494 = EDGE_CURVE ( 'NONE', #676, #584, #846, .T. ) ;
#495 = ORIENTED_EDGE ( 'NONE', *, *, #91, .T. ) ;
#496 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.00000000000000000, -8.298233255622939453 ) ) ;
#497 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, 0.000000000000000000, 13.76176674437705394 ) ) ;
#498 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#499 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 15.18962453810299529 ) ) ;
#500 = ORIENTED_EDGE ( 'NONE', *, *, #569, .F. ) ;
#501 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#502 = LINE ( 'NONE', #240, #863 ) ;
#503 = ORIENTED_EDGE ( 'NONE', *, *, #615, .T. ) ;
#504 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#505 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #250, #957, ( #655 ) ) ;
#506 = EDGE_CURVE ( 'NONE', #702, #4, #5, .T. ) ;
#507 = VERTEX_POINT ( 'NONE', #464 ) ;
#508 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.50000000000000000, -8.298233255622939453 ) ) ;
#509 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000004441, 17.10176674437705913 ) ) ;
#510 = EDGE_LOOP ( 'NONE', ( #438, #286 ) ) ;
#511 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ;
#512 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.058233255622941904 ) ) ;
#513 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
#514 = ORIENTED_EDGE ( 'NONE', *, *, #868, .T. ) ;
#515 = PLANE ( 'NONE',  #370 ) ;
#516 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#517 = ORIENTED_EDGE ( 'NONE', *, *, #777, .T. ) ;
#518 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ;
#519 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, 16.60176674437705557 ) ) ;
#520 = LOCAL_TIME ( 8, 45, 20.00000000000000000, #162 ) ;
#521 = EDGE_CURVE ( 'NONE', #4, #702, #932, .T. ) ;
#522 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
#523 = VECTOR ( 'NONE', #137, 1000.000000000000000 ) ;
#524 = SPHERICAL_SURFACE ( 'NONE', #312, 0.5000000000000000000 ) ;
#525 = APPROVAL_PERSON_ORGANIZATION ( #614, #270, #168 ) ;
#526 = VERTEX_POINT ( 'NONE', #93 ) ;
#527 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 13.68962453810298996 ) ) ;
#528 = AXIS2_PLACEMENT_3D ( 'NONE', #972, #575, #262 ) ;
#529 = APPROVAL ( #85, '未指定' ) ;
#530 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #728 ) ;
#531 = DESIGN_CONTEXT ( 'detailed design', #258, 'design' ) ;
#532 = ORIENTED_EDGE ( 'NONE', *, *, #731, .F. ) ;
#533 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#534 = SECURITY_CLASSIFICATION ( '', '', #805 ) ;
#535 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ;
#536 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 15.26176674437705927 ) ) ;
#537 = CIRCLE ( 'NONE', #278, 0.5000000000000004441 ) ;
#538 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ;
#539 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#540 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #709, #719 ) ;
#541 = DATE_AND_TIME ( #697, #56 ) ;
#542 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, 0.000000000000000000, -6.558233255622946345 ) ) ;
#543 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 4.351766744377058238 ) ) ;
#544 = EDGE_CURVE ( 'NONE', #840, #937, #298, .T. ) ;
#545 = ORIENTED_EDGE ( 'NONE', *, *, #692, .F. ) ;
#546 = EDGE_LOOP ( 'NONE', ( #623, #518 ) ) ;
#547 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.808233255622944569 ) ) ;
#548 = PLANE ( 'NONE',  #721 ) ;
#549 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#550 = FACE_BOUND ( 'NONE', #222, .T. ) ;
#551 = EDGE_CURVE ( 'NONE', #956, #446, #874, .T. ) ;
#552 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#553 = ADVANCED_FACE ( 'NONE', ( #627 ), #303, .F. ) ;
#554 = DATE_AND_TIME ( #637, #96 ) ;
#555 = ORIENTED_EDGE ( 'NONE', *, *, #377, .T. ) ;
#556 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ;
#557 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#558 = APPROVAL_ROLE ( '' ) ;
#559 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#560 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#561 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, 16.60176674437705557 ) ) ;
#562 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#563 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #273, #32 ) ;
#564 = SPHERICAL_SURFACE ( 'NONE', #806, 0.5000000000000000000 ) ;
#565 = ORIENTED_EDGE ( 'NONE', *, *, #200, .F. ) ;
#566 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 13.76176674437705394 ) ) ;
#567 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, 0.000000000000000000, 15.26176674437705927 ) ) ;
#568 = ADVANCED_FACE ( 'NONE', ( #459 ), #237, .T. ) ;
#569 = EDGE_CURVE ( 'NONE', #990, #645, #570, .T. ) ;
#570 = CIRCLE ( 'NONE', #705, 0.7500000000000019984 ) ;
#571 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000004441, -8.298233255622939453 ) ) ;
#572 = AXIS2_PLACEMENT_3D ( 'NONE', #962, #25, #252 ) ;
#573 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#574 = VECTOR ( 'NONE', #132, 1000.000000000000000 ) ;
#575 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#576 = ADVANCED_FACE ( 'NONE', ( #1021 ), #159, .T. ) ;
#577 = LINE ( 'NONE', #902, #574 ) ;
#578 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 15.50000000000000000, 16.60176674437705557 ) ) ;
#579 = ORIENTED_EDGE ( 'NONE', *, *, #33, .F. ) ;
#580 = FACE_OUTER_BOUND ( 'NONE', #161, .T. ) ;
#581 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#582 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #473, #804 ) ;
#583 = ADVANCED_FACE ( 'NONE', ( #87 ), #387, .T. ) ;
#584 = VERTEX_POINT ( 'NONE', #391 ) ;
#585 = DIRECTION ( 'NONE',  ( -2.731847993664263218E-16, -0.000000000000000000, -1.000000000000000000 ) ) ;
#586 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ;
#587 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 3.601766744377056018 ) ) ;
#588 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.000000000000000000, -7.798233255622939453 ) ) ;
#589 = EDGE_CURVE ( 'NONE', #409, #675, #889, .T. ) ;
#590 = ORIENTED_EDGE ( 'NONE', *, *, #808, .T. ) ;
#591 = ORIENTED_EDGE ( 'NONE', *, *, #247, .F. ) ;
#592 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;
#593 = ORIENTED_EDGE ( 'NONE', *, *, #880, .F. ) ;
#594 = EDGE_LOOP ( 'NONE', ( #745, #279, #522, #683 ) ) ;
#595 = FACE_OUTER_BOUND ( 'NONE', #152, .T. ) ;
#596 = VERTEX_POINT ( 'NONE', #708 ) ;
#597 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.50000000000000000, 17.10176674437705913 ) ) ;
#598 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#599 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #443, #1016 ) ;
#600 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
#601 = LINE ( 'NONE', #287, #659 ) ;
#602 = EDGE_CURVE ( 'NONE', #6, #212, #994, .T. ) ;
#603 = ADVANCED_FACE ( 'NONE', ( #857 ), #319, .T. ) ;
#604 = CIRCLE ( 'NONE', #175, 0.7500000000000024425 ) ;
#605 = PLANE ( 'NONE',  #34 ) ;
#606 = ORIENTED_EDGE ( 'NONE', *, *, #849, .F. ) ;
#607 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, 0.000000000000000000, -5.808233255622944569 ) ) ;
#608 = EDGE_LOOP ( 'NONE', ( #706, #586, #640, #294 ) ) ;
#609 = EDGE_CURVE ( 'NONE', #859, #80, #3, .T. ) ;
#610 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.808233255622944569 ) ) ;
#611 = EDGE_LOOP ( 'NONE', ( #146, #181, #375, #150 ) ) ;
#612 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#613 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ;
#614 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#615 = EDGE_CURVE ( 'NONE', #891, #1012, #235, .T. ) ;
#616 = ADVANCED_FACE ( 'NONE', ( #460 ), #799, .T. ) ;
#617 = CIRCLE ( 'NONE', #790, 0.7500000000000024425 ) ;
#618 = CIRCLE ( 'NONE', #907, 0.7500000000000019984 ) ;
#619 = ORIENTED_EDGE ( 'NONE', *, *, #885, .F. ) ;
#620 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 14.43962453810299174 ) ) ;
#621 = AXIS2_PLACEMENT_3D ( 'NONE', #383, #851, #88 ) ;
#622 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #57, #516 ) ;
#623 = ORIENTED_EDGE ( 'NONE', *, *, #493, .F. ) ;
#624 = DATE_TIME_ROLE ( 'creation_date' ) ;
#625 = EDGE_CURVE ( 'NONE', #764, #507, #482, .T. ) ;
#626 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#627 = FACE_OUTER_BOUND ( 'NONE', #76, .T. ) ;
#628 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#629 = CIRCLE ( 'NONE', #9, 0.5000000000000004441 ) ;
#630 = VERTEX_POINT ( 'NONE', #787 ) ;
#631 = CIRCLE ( 'NONE', #241, 0.5000000000000004441 ) ;
#632 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #258 ) ;
#633 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 15.50000000000000000, 16.60176674437705557 ) ) ;
#634 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #326, #860, ( #714 ) ) ;
#635 = ADVANCED_FACE ( 'NONE', ( #550, #332, #389, #722, #556 ), #548, .T. ) ;
#636 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, -8.298233255622939453 ) ) ;
#637 = CALENDAR_DATE ( 2025, 5, 9 ) ;
#638 = AXIS2_PLACEMENT_3D ( 'NONE', #47, #581, #345 ) ;
#639 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#640 = ORIENTED_EDGE ( 'NONE', *, *, #903, .T. ) ;
#641 = ADVANCED_FACE ( 'NONE', ( #403 ), #327, .T. ) ;
#642 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, -2.731847993664255823E-16 ) ) ;
#643 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 8, 0, .AHEAD. ) ;
#644 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.50000000000000000, -7.798233255622939453 ) ) ;
#645 = VERTEX_POINT ( 'NONE', #398 ) ;
#646 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.00000000000000000, -8.298233255622939453 ) ) ;
#647 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#648 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#649 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ;
#650 = EDGE_CURVE ( 'NONE', #927, #859, #753, .T. ) ;
#651 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 15.50000000000000000, 0.000000000000000000 ) ) ;
#652 = EDGE_CURVE ( 'NONE', #446, #956, #107, .T. ) ;
#653 = FACE_OUTER_BOUND ( 'NONE', #274, .T. ) ;
#654 = VECTOR ( 'NONE', #139, 1000.000000000000000 ) ;
#655 = PRODUCT ( 'ZP03-3SXX 模型', 'ZP03-3SXX 模型', '', ( #713 ) ) ;
#656 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#657 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#658 = SPHERICAL_SURFACE ( 'NONE', #815, 0.5000000000000000000 ) ;
#659 = VECTOR ( 'NONE', #592, 1000.000000000000000 ) ;
#660 = CC_DESIGN_APPROVAL ( #270, ( #977 ) ) ;
#661 = FACE_OUTER_BOUND ( 'NONE', #297, .T. ) ;
#662 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 15.18962453810299529 ) ) ;
#663 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#664 = EDGE_CURVE ( 'NONE', #891, #726, #471, .T. ) ;
#665 = ADVANCED_FACE ( 'NONE', ( #178 ), #243, .T. ) ;
#666 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#667 = ORIENTED_EDGE ( 'NONE', *, *, #759, .T. ) ;
#668 = CYLINDRICAL_SURFACE ( 'NONE', #926, 0.7500000000000024425 ) ;
#669 = ORIENTED_EDGE ( 'NONE', *, *, #221, .F. ) ;
#670 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#671 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 14.51176674437705749 ) ) ;
#672 = VECTOR ( 'NONE', #723, 1000.000000000000000 ) ;
#673 = EDGE_CURVE ( 'NONE', #596, #245, #192, .T. ) ;
#674 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#675 = VERTEX_POINT ( 'NONE', #792 ) ;
#676 = VERTEX_POINT ( 'NONE', #16 ) ;
#677 = DIRECTION ( 'NONE',  ( -2.731847993664263218E-16, -0.000000000000000000, -1.000000000000000000 ) ) ;
#678 = VERTEX_POINT ( 'NONE', #104 ) ;
#679 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#680 = AXIS2_PLACEMENT_3D ( 'NONE', #519, #742, #376 ) ;
#681 = CYLINDRICAL_SURFACE ( 'NONE', #189, 0.5000000000000004441 ) ;
#682 = EDGE_CURVE ( 'NONE', #676, #212, #226, .T. ) ;
#683 = ORIENTED_EDGE ( 'NONE', *, *, #494, .F. ) ;
#684 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#685 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, 0.000000000000000000 ) ) ;
#686 = ORIENTED_EDGE ( 'NONE', *, *, #652, .F. ) ;
#687 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#688 = PLANE ( 'NONE',  #841 ) ;
#689 = ORIENTED_EDGE ( 'NONE', *, *, #869, .T. ) ;
#690 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#691 = EDGE_CURVE ( 'NONE', #856, #507, #968, .T. ) ;
#692 = EDGE_CURVE ( 'NONE', #78, #1001, #881, .T. ) ;
#693 = ORIENTED_EDGE ( 'NONE', *, *, #551, .F. ) ;
#694 = ORIENTED_EDGE ( 'NONE', *, *, #461, .F. ) ;
#695 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;
#696 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ;
#697 = CALENDAR_DATE ( 2025, 5, 9 ) ;
#698 = VECTOR ( 'NONE', #129, 1000.000000000000000 ) ;
#699 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ;
#700 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#701 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#702 = VERTEX_POINT ( 'NONE', #259 ) ;
#703 = CC_DESIGN_APPROVAL ( #529, ( #714 ) ) ;
#704 = ORIENTED_EDGE ( 'NONE', *, *, #31, .T. ) ;
#705 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #170, #786 ) ;
#706 = ORIENTED_EDGE ( 'NONE', *, *, #615, .F. ) ;
#707 = ADVANCED_FACE ( 'NONE', ( #182 ), #479, .T. ) ;
#708 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 0.5000000000000004441, -7.798233255622939453 ) ) ;
#709 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#710 = AXIS2_PLACEMENT_3D ( 'NONE', #715, #867, #407 ) ;
#711 = FACE_OUTER_BOUND ( 'NONE', #358, .T. ) ;
#712 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #122, #739 ) ;
#713 = MECHANICAL_CONTEXT ( 'NONE', #728, 'mechanical' ) ;
#714 = PRODUCT_DEFINITION ( '未知', '', #977, #531 ) ;
#715 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#716 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.50000000000000000, -8.298233255622939453 ) ) ;
#717 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#718 = CIRCLE ( 'NONE', #773, 0.7500000000000024425 ) ;
#719 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#720 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 4.351766744377058238 ) ) ;
#721 = AXIS2_PLACEMENT_3D ( 'NONE', #966, #871, #246 ) ;
#722 = FACE_BOUND ( 'NONE', #425, .T. ) ;
#723 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#724 = ADVANCED_FACE ( 'NONE', ( #818 ), #812, .T. ) ;
#725 = CIRCLE ( 'NONE', #288, 0.5000000000000004441 ) ;
#726 = VERTEX_POINT ( 'NONE', #497 ) ;
#727 = FACE_OUTER_BOUND ( 'NONE', #998, .T. ) ;
#728 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ;
#729 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#730 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.00000000000000000, 17.10176674437705913 ) ) ;
#731 = EDGE_CURVE ( 'NONE', #80, #42, #441, .T. ) ;
#732 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 4.351766744377058238 ) ) ;
#733 = FACE_OUTER_BOUND ( 'NONE', #996, .T. ) ;
#734 = SPHERICAL_SURFACE ( 'NONE', #449, 0.5000000000000000000 ) ;
#735 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, 17.10176674437705913 ) ) ;
#736 = ADVANCED_FACE ( 'NONE', ( #887 ), #658, .T. ) ;
#737 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#738 = AXIS2_PLACEMENT_3D ( 'NONE', #776, #700, #2 ) ;
#739 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#740 = FACE_OUTER_BOUND ( 'NONE', #611, .T. ) ;
#741 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
#742 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;
#743 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 15.00000000000000000, 16.60176674437705557 ) ) ;
#744 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;
#745 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ;
#746 = LINE ( 'NONE', #975, #54 ) ;
#747 = EDGE_LOOP ( 'NONE', ( #555, #924, #227 ) ) ;
#748 = VERTEX_POINT ( 'NONE', #29 ) ;
#749 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#750 = AXIS2_PLACEMENT_3D ( 'NONE', #651, #417, #657 ) ;
#751 = EDGE_LOOP ( 'NONE', ( #1000, #381, #517, #1023 ) ) ;
#752 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.50000000000000000, -8.298233255622939453 ) ) ;
#753 = CIRCLE ( 'NONE', #281, 0.5000000000000004441 ) ;
#754 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ;
#755 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ;
#756 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #878, #395 ) ;
#757 = FACE_OUTER_BOUND ( 'NONE', #944, .T. ) ;
#758 = EDGE_CURVE ( 'NONE', #769, #309, #982, .T. ) ;
#759 = EDGE_CURVE ( 'NONE', #856, #630, #317, .T. ) ;
#760 = ORIENTED_EDGE ( 'NONE', *, *, #83, .T. ) ;
#761 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#762 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #477, #642 ) ;
#763 = VECTOR ( 'NONE', #958, 1000.000000000000000 ) ;
#764 = VERTEX_POINT ( 'NONE', #418 ) ;
#765 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
#766 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, 0.000000000000000000, 14.43962453810299174 ) ) ;
#767 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #896, #119 ) ;
#768 = DIRECTION ( 'NONE',  ( -0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#769 = VERTEX_POINT ( 'NONE', #275 ) ;
#770 = ADVANCED_FACE ( 'NONE', ( #653 ), #415, .F. ) ;
#771 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, 0.000000000000000000 ) ) ;
#772 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ;
#773 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #282, #981 ) ;
#774 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.50000000000000000, -8.298233255622939453 ) ) ;
#775 = VERTEX_POINT ( 'NONE', #567 ) ;
#776 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, 0.000000000000000000, -5.808233255622944569 ) ) ;
#777 = EDGE_CURVE ( 'NONE', #584, #78, #144, .T. ) ;
#778 = ORIENTED_EDGE ( 'NONE', *, *, #199, .T. ) ;
#779 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 15.00000000000000000, 16.60176674437705557 ) ) ;
#780 = ORIENTED_EDGE ( 'NONE', *, *, #247, .T. ) ;
#781 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#782 = ADVANCED_FACE ( 'NONE', ( #580 ), #193, .T. ) ;
#783 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
#784 = DATE_TIME_ROLE ( 'classification_date' ) ;
#785 = EDGE_LOOP ( 'NONE', ( #379, #251, #532, #876 ) ) ;
#786 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#787 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.000000000000000000, -7.798233255622939453 ) ) ;
#788 = ORIENTED_EDGE ( 'NONE', *, *, #221, .T. ) ;
#789 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#790 = AXIS2_PLACEMENT_3D ( 'NONE', #899, #359, #904 ) ;
#791 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 15.50000000000000000, 16.60176674437705557 ) ) ;
#792 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.058233255622941904 ) ) ;
#793 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#794 = MANIFOLD_SOLID_BREP ( '凸台-拉伸2', #440 ) ;
#795 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#796 = ADVANCED_FACE ( 'NONE', ( #733 ), #44, .T. ) ;
#797 = VECTOR ( 'NONE', #439, 1000.000000000000000 ) ;
#798 = VECTOR ( 'NONE', #1004, 1000.000000000000000 ) ;
#799 = CYLINDRICAL_SURFACE ( 'NONE', #434, 0.5000000000000004441 ) ;
#800 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #112, #39 ) ;
#801 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -6.558233255622946345 ) ) ;
#802 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 4.351766744377058238 ) ) ;
#803 = LOCAL_TIME ( 8, 45, 20.00000000000000000, #643 ) ;
#804 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#805 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ;
#806 = AXIS2_PLACEMENT_3D ( 'NONE', #888, #190, #413 ) ;
#807 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;
#808 = EDGE_CURVE ( 'NONE', #212, #859, #269, .T. ) ;
#809 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#810 = VECTOR ( 'NONE', #639, 1000.000000000000000 ) ;
#811 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#812 = CYLINDRICAL_SURFACE ( 'NONE', #844, 0.5000000000000004441 ) ;
#813 = VERTEX_POINT ( 'NONE', #561 ) ;
#814 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#815 = AXIS2_PLACEMENT_3D ( 'NONE', #350, #188, #501 ) ;
#816 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #836, #1002 ) ;
#817 = LINE ( 'NONE', #496, #838 ) ;
#818 = FACE_OUTER_BOUND ( 'NONE', #594, .T. ) ;
#819 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#820 = EDGE_CURVE ( 'NONE', #764, #384, #746, .T. ) ;
#821 = DIRECTION ( 'NONE',  ( -0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;
#822 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, -7.798233255622939453 ) ) ;
#823 = FACE_OUTER_BOUND ( 'NONE', #751, .T. ) ;
#824 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 15.00000000000000000, 16.60176674437705557 ) ) ;
#825 = EDGE_CURVE ( 'NONE', #927, #6, #49, .T. ) ;
#826 = EDGE_LOOP ( 'NONE', ( #850, #229, #495, #905 ) ) ;
#827 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#828 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 14.43962453810299174 ) ) ;
#829 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 0.5000000000000004441, -8.298233255622939453 ) ) ;
#830 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ;
#831 = FACE_OUTER_BOUND ( 'NONE', #608, .T. ) ;
#832 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#833 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#834 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;
#835 = ORIENTED_EDGE ( 'NONE', *, *, #825, .F. ) ;
#836 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#837 = ADVANCED_FACE ( 'NONE', ( #727 ), #28, .T. ) ;
#838 = VECTOR ( 'NONE', #585, 1000.000000000000000 ) ;
#839 = ORIENTED_EDGE ( 'NONE', *, *, #493, .T. ) ;
#840 = VERTEX_POINT ( 'NONE', #342 ) ;
#841 = AXIS2_PLACEMENT_3D ( 'NONE', #752, #75, #436 ) ;
#842 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 15.26176674437705927 ) ) ;
#843 = CYLINDRICAL_SURFACE ( 'NONE', #890, 0.7500000000000024425 ) ;
#844 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #356, #729 ) ;
#845 = EDGE_LOOP ( 'NONE', ( #260, #783, #399, #70 ) ) ;
#846 = LINE ( 'NONE', #151, #392 ) ;
#847 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 5.101766744377060903 ) ) ;
#848 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #965, #784, ( #534 ) ) ;
#849 = EDGE_CURVE ( 'NONE', #6, #856, #123, .T. ) ;
#850 = ORIENTED_EDGE ( 'NONE', *, *, #849, .T. ) ;
#851 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#852 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
#853 = CIRCLE ( 'NONE', #767, 0.5000000000000004441 ) ;
#854 = LINE ( 'NONE', #364, #798 ) ;
#855 = ADVANCED_FACE ( 'NONE', ( #740 ), #421, .F. ) ;
#856 = VERTEX_POINT ( 'NONE', #573 ) ;
#857 = FACE_OUTER_BOUND ( 'NONE', #185, .T. ) ;
#858 = AXIS2_PLACEMENT_3D ( 'NONE', #802, #875, #953 ) ;
#859 = VERTEX_POINT ( 'NONE', #735 ) ;
#860 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ;
#861 = CARTESIAN_POINT ( 'NONE',  ( 25.64236838889488013, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#862 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#863 = VECTOR ( 'NONE', #433, 1000.000000000000000 ) ;
#864 = PERSON_AND_ORGANIZATION ( #901, #263 ) ;
#865 = EDGE_LOOP ( 'NONE', ( #918, #503 ) ) ;
#866 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#867 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#868 = EDGE_CURVE ( 'NONE', #775, #726, #617, .T. ) ;
#869 = EDGE_CURVE ( 'NONE', #769, #937, #186, .T. ) ;
#870 = FACE_OUTER_BOUND ( 'NONE', #304, .T. ) ;
#871 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#872 = CYLINDRICAL_SURFACE ( 'NONE', #762, 0.5000000000000004441 ) ;
#873 = CALENDAR_DATE ( 2025, 5, 9 ) ;
#874 = CIRCLE ( 'NONE', #420, 0.7500000000000019984 ) ;
#875 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#876 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ;
#877 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#878 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#879 = ADVANCED_FACE ( 'NONE', ( #353 ), #668, .T. ) ;
#880 = EDGE_CURVE ( 'NONE', #1001, #84, #817, .T. ) ;
#881 = LINE ( 'NONE', #633, #763 ) ;
#882 = ORIENTED_EDGE ( 'NONE', *, *, #869, .F. ) ;
#883 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.00000000000000000, -7.798233255622939453 ) ) ;
#884 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 4.351766744377058238 ) ) ;
#885 = EDGE_CURVE ( 'NONE', #84, #302, #341, .T. ) ;
#886 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #714 ) ;
#887 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
#888 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.5000000000000000000, 16.60176674437705557 ) ) ;
#889 = CIRCLE ( 'NONE', #311, 0.7500000000000024425 ) ;
#890 = AXIS2_PLACEMENT_3D ( 'NONE', #610, #833, #64 ) ;
#891 = VERTEX_POINT ( 'NONE', #566 ) ;
#892 = CYLINDRICAL_SURFACE ( 'NONE', #465, 0.7500000000000024425 ) ;
#893 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#894 = ADVANCED_FACE ( 'NONE', ( #111 ), #892, .T. ) ;
#895 = VECTOR ( 'NONE', #552, 1000.000000000000000 ) ;
#896 = DIRECTION ( 'NONE',  ( -0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#897 = AXIS2_PLACEMENT_3D ( 'NONE', #743, #737, #412 ) ;
#898 = CIRCLE ( 'NONE', #12, 0.5000000000000004441 ) ;
#899 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, 0.000000000000000000, 14.51176674437705749 ) ) ;
#900 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, 17.10176674437705913 ) ) ;
#901 = PERSON ( '未指定', '未指定', '未指定', ('未指定'), ('未指定'), ('未指定') ) ;
#902 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511277, 15.50000000000000000, 6.790727104404286494E-15 ) ) ;
#903 = EDGE_CURVE ( 'NONE', #726, #775, #184, .T. ) ;
#904 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#905 = ORIENTED_EDGE ( 'NONE', *, *, #825, .T. ) ;
#906 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889488666, -4.000000000000000000, -5.808233255622944569 ) ) ;
#907 = AXIS2_PLACEMENT_3D ( 'NONE', #720, #26, #560 ) ;
#908 = CYLINDRICAL_SURFACE ( 'NONE', #712, 0.5000000000000004441 ) ;
#909 = AXIS2_PLACEMENT_3D ( 'NONE', #559, #100, #628 ) ;
#910 = ORIENTED_EDGE ( 'NONE', *, *, #731, .T. ) ;
#911 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000000000, -8.298233255622939453 ) ) ;
#912 = ORIENTED_EDGE ( 'NONE', *, *, #569, .T. ) ;
#913 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 13.68962453810298996 ) ) ;
#914 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#915 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;
#916 = ORIENTED_EDGE ( 'NONE', *, *, #997, .F. ) ;
#917 = ADVANCED_FACE ( 'NONE', ( #970 ), #261, .T. ) ;
#918 = ORIENTED_EDGE ( 'NONE', *, *, #200, .T. ) ;
#919 = CARTESIAN_POINT ( 'NONE',  ( 23.00236838889487956, -4.000000000000000000, 14.51176674437705749 ) ) ;
#920 = ORIENTED_EDGE ( 'NONE', *, *, #979, .T. ) ;
#921 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ;
#922 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#923 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ;
#924 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ;
#925 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -8.673617379884027583E-16, -1.000000000000000000 ) ) ;
#926 = AXIS2_PLACEMENT_3D ( 'NONE', #732, #811, #196 ) ;
#927 = VERTEX_POINT ( 'NONE', #824 ) ;
#928 = ORIENTED_EDGE ( 'NONE', *, *, #880, .T. ) ;
#929 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
#930 = VERTEX_POINT ( 'NONE', #911 ) ;
#931 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 0.5000000000000004441, -7.798233255622939453 ) ) ;
#932 = CIRCLE ( 'NONE', #738, 0.7500000000000024425 ) ;
#933 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #789, #239, ( #534 ) ) ;
#934 = EDGE_CURVE ( 'NONE', #930, #245, #388, .T. ) ;
#935 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110511632, 15.00000000000000000, -7.798233255622939453 ) ) ;
#936 = CYLINDRICAL_SURFACE ( 'NONE', #65, 0.7500000000000024425 ) ;
#937 = VERTEX_POINT ( 'NONE', #662 ) ;
#938 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, -8.298233255622939453 ) ) ;
#939 = CC_DESIGN_APPROVAL ( #474, ( #534 ) ) ;
#940 = EDGE_LOOP ( 'NONE', ( #788, #545, #163, #694 ) ) ;
#941 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110510922, 15.50000000000000000, 17.10176674437705913 ) ) ;
#942 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #877, #967 ) ;
#943 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ;
#944 = EDGE_LOOP ( 'NONE', ( #110, #565, #27, #514 ) ) ;
#945 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#946 = AXIS2_PLACEMENT_3D ( 'NONE', #791, #455, #451 ) ;
#947 = SHAPE_DEFINITION_REPRESENTATION ( #886, #71 ) ;
#948 = ORIENTED_EDGE ( 'NONE', *, *, #461, .T. ) ;
#949 = CARTESIAN_POINT ( 'NONE',  ( 25.14236838889488013, 15.50000000000000000, 16.60176674437705557 ) ) ;
#950 = VECTOR ( 'NONE', #549, 1000.000000000000000 ) ;
#951 = EDGE_CURVE ( 'NONE', #42, #813, #983, .T. ) ;
#952 = ADVANCED_FACE ( 'NONE', ( #424 ), #605, .T. ) ;
#953 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#954 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #744, #357 ) ;
#955 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, -0.000000000000000000 ) ) ;
#956 = VERTEX_POINT ( 'NONE', #847 ) ;
#957 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ;
#958 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#959 = ORIENTED_EDGE ( 'NONE', *, *, #377, .F. ) ;
#960 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#961 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 8, 0, .AHEAD. ) ;
#962 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 14.43962453810299174 ) ) ;
#963 = LINE ( 'NONE', #730, #329 ) ;
#964 = EDGE_CURVE ( 'NONE', #675, #702, #284, .T. ) ;
#965 = DATE_AND_TIME ( #873, #401 ) ;
#966 = CARTESIAN_POINT ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#967 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#968 = LINE ( 'NONE', #644, #396 ) ;
#969 = FACE_OUTER_BOUND ( 'NONE', #432, .T. ) ;
#970 = FACE_OUTER_BOUND ( 'NONE', #845, .T. ) ;
#971 = VECTOR ( 'NONE', #348, 1000.000000000000000 ) ;
#972 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 14.43962453810299174 ) ) ;
#973 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#974 = VECTOR ( 'NONE', #768, 1000.000000000000000 ) ;
#975 = CARTESIAN_POINT ( 'NONE',  ( -25.35763161110511632, 15.50000000000000000, -7.798233255622939453 ) ) ;
#976 = CIRCLE ( 'NONE', #223, 0.5000000000000004441 ) ;
#977 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( '任何', '', #655, .NOT_KNOWN. ) ;
#978 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -0.000000000000000000, -1.000000000000000000 ) ) ;
#979 = EDGE_CURVE ( 'NONE', #526, #856, #219, .T. ) ;
#980 = ADVANCED_FACE ( 'NONE', ( #301 ), #688, .F. ) ;
#981 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#982 = CIRCLE ( 'NONE', #99, 0.7500000000000024425 ) ;
#983 = LINE ( 'NONE', #578, #698 ) ;
#984 = ORIENTED_EDGE ( 'NONE', *, *, #692, .T. ) ;
#985 = CARTESIAN_POINT ( 'NONE',  ( -24.85763161110510922, 0.5000000000000004441, 16.60176674437705557 ) ) ;
#986 = ADVANCED_FACE ( 'NONE', ( #429 ), #524, .T. ) ;
#987 = APPROVAL_PERSON_ORGANIZATION ( #234, #474, #254 ) ;
#988 = LINE ( 'NONE', #993, #318 ) ;
#989 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#990 = VERTEX_POINT ( 'NONE', #211 ) ;
#991 = CYLINDRICAL_SURFACE ( 'NONE', #265, 0.7500000000000024425 ) ;
#992 = AXIS2_PLACEMENT_3D ( 'NONE', #883, #337, #648 ) ;
#993 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 5.101766744377060903 ) ) ;
#994 = CIRCLE ( 'NONE', #22, 0.5000000000000004441 ) ;
#995 = ADVANCED_FACE ( 'NONE', ( #595 ), #843, .T. ) ;
#996 = EDGE_LOOP ( 'NONE', ( #778, #765 ) ) ;
#997 = EDGE_CURVE ( 'NONE', #84, #596, #854, .T. ) ;
#998 = EDGE_LOOP ( 'NONE', ( #90, #285 ) ) ;
#999 = CARTESIAN_POINT ( 'NONE',  ( -22.71763161110511575, -4.000000000000000000, 14.43962453810299174 ) ) ;
#1000 = ORIENTED_EDGE ( 'NONE', *, *, #673, .T. ) ;
#1001 = VERTEX_POINT ( 'NONE', #779 ) ;
#1002 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;
#1003 = ORIENTED_EDGE ( 'NONE', *, *, #903, .F. ) ;
#1004 = DIRECTION ( 'NONE',  ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;
#1005 = EDGE_CURVE ( 'NONE', #813, #764, #148, .T. ) ;
#1006 = VECTOR ( 'NONE', #677, 1000.000000000000000 ) ;
#1007 = ORIENTED_EDGE ( 'NONE', *, *, #390, .F. ) ;
#1008 = ORIENTED_EDGE ( 'NONE', *, *, #885, .T. ) ;
#1009 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;
#1010 = ADVANCED_FACE ( 'NONE', ( #371 ), #681, .T. ) ;
#1011 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;
#1012 = VERTEX_POINT ( 'NONE', #536 ) ;
#1013 = DIRECTION ( 'NONE',  ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;
#1014 = AXIS2_PLACEMENT_3D ( 'NONE', #620, #945, #314 ) ;
#1015 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
#1016 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#1017 = ORIENTED_EDGE ( 'NONE', *, *, #777, .F. ) ;
#1018 = DIRECTION ( 'NONE',  ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;
#1019 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ;
#1020 = ORIENTED_EDGE ( 'NONE', *, *, #808, .F. ) ;
#1021 = FACE_OUTER_BOUND ( 'NONE', #51, .T. ) ;
#1022 = VECTOR ( 'NONE', #266, 1000.000000000000000 ) ;
#1023 = ORIENTED_EDGE ( 'NONE', *, *, #267, .F. ) ;
#1024 = APPROVAL_DATE_TIME ( #469, #474 ) ;
#1025 = ADVANCED_FACE ( 'NONE', ( #68 ), #215, .T. ) ;
ENDSEC;
END-ISO-10303-21;